Developed biomass sawdust pellet machine will become your energy efficient right-hand man
Biomass sawdust pellet machine has environmental benefits, the straw and biomass pellet machine will be changed into waste, which not only increases the income for farmers, but also protects the environment. It solves the difficult problem of large-scale handling by governments at all levels, and is strongly supported by state policies!
Biomass sawdust pellet machine models must be chosen that is suitable for yourself, there are many kinds of pellet machines, models, parameters and scope of application are not the same. So, when the user is buying, they must tell the businessman clearly, what kind of material the machine is used to do, and buy the machine according to their actual situation. Before buying, it is best to test machine. For example, the flat die pellet machine is economical, practical, small footprint, easy to operate, flexible to move, easy to install and maintain, and suitable for small and medium farmers (farms), but the output is low, and the service life of the template pressing wheel is short, which is suitable for pressing the granule material with little grass powder content.
Biomass wood pellet machine, choose to use the original (machine) parts or conform to the quality standards of the template, at the same time, the mold must be timely maintenance. Roller and die are the heart of pellet machine, and their quality are very important to the output of pellet machine. The gap between the roller and the template should not be too large or too small, if too large, it will has low yield, poor pellet density; if too small, severe mechanical will be wear seriously, shorten the service life of the mold. In use, a small amount of grease added to the raw material can also effectively increase production and reduce mold wear. After production, use a small amount of bran to mix the cooking oil and then squeeze for one or two minutes to allow the oil to fill the mold hole so that it can be fired at the next production. In doing so, not only maintenance templates and reduce energy consumption, but also increase production.
How to use wood pellet machine correctly?
Preparation of biomass pellet machine must be done in a comprehensive way and reasonable working hours at the same time. Before use, users must, fully grind the template for a reasonable, patient, meticulous with bran, sand, oil in a certain proportion of mixing evenly. Grinding thirty minutes to one hour, without downtime, can be directly feed production. Some users are not fully prepared for spare templates and fittings, and the models and materials are not enough. Although seemingly insignificant, these problems can be well rewarded in production if handled properly. In order to catch feed production, some users extend working hours and even some sick work, so that the machine overloaded work. As a result, the machine can not be timely overhaul, oiling and cooling, but also easy to affect the production of grain pellet machine. We specialize in producing biomass pellet machine, biomass fuel pellet machine, wood pellet machine, straw pellet machine, sawdust pellet machine, etc. The most advanced technology, the most professional talents, for you to create the most perfect equipment.
