How to maximize the value of straw pellet machine?

Straw pellet machine is mainly suitable for coarse fiber pelletizing, such as straw, rice husk, cotton stalk, cottonseed husk, weeds and other crops straw, domestic waste, waste plastics and factory waste, it can also be applied to low temperature biological fertilizer, organic fertilizer, and compound fertilizer.

For the straw pellet machine, granulation system is an important part of the whole processing technology, and pellet machine is the key equipment in the whole granulation system, Whether the operation is normal and the operation is proper will directly affect the quality of the final product. Combined with years of on-site management experience and theoretical knowledge, we discussed how to operate the granulator correctly, and summarized it from many aspects for reference.

Operation rules of straw pellet machine

What should be paid attention to before the use of straw pellet machine? The following is our technical staff for everyone to introduce.Please read the instructions carefully before use, operate strictly according to the operating procedures and sequence, and install, operate and maintain according to the requirements.

• Straw pellet machine work site should be spacious, ventilated, equipped with reliable fire protection equipment, no smoking and open fire on the work site.
• Idling three minutes after each start, when the machine is running normally, then evenly feeding.
• Be sure to remove the hard materials in the raw materials, put stones, metal, flammable and explosive goods into the hopper, so as not to damage the straw pellet machine.
• The hopper is not allowed to be switched on, so as to prevent the material from flying out.
• Do not put the hands into the hopper or other tools when running normally, so as to avoid danger.
• A small amount of wet material is gradually added before the shutdown, so that the material can be discharged smoothly after the next day.
• In the rotation process, if there is abnormal sound heard in the machine, should immediately stop check.

In order to make the straw pellet machine create greater benefits for us, we must strictly abide by the correct use rules of straw pellet machine.

Operation rules of straw pellet machine operator

Straw pellet machine operator is important for pellet making process, who will directly control the quality of straw pellet, a qualified granulation worker must first master the operation of the granulation system, according to years of practical experience, summed up as follows:

1. The particle size of the raw material should be a certain proportion: the general diameter is 4mm, the sieve passes completely.
2. The purpose of adjusting quality or adding water:

• to improve production efficiency;
• to extend the service life of the die;
• to reduce energy costs;

3. After adjusting the quality, moisture should be controlled from 15% to 18%.

In a word, the quality of the granule and the output of the product are closely related to the personal quality of the granulation personnel. They must produce qualified straw pellets according to the changes of ambient temperature and humidity, the change of powder moisture content and pellet size, the adjustment of formula, equipment wear, and the special requirements of customers. To produce high quality pellets, pelletizing personnel must have a comprehensive knowledge, rich experience, strong sense of responsibility, overcome all kinds of difficulties, in order to produce high-quality and efficient pellets.

According to the size of raw materials and moisture conditions, our straw pellet machine and complete set of straw particle production line can be divided into chip, fine powder, screening, drying, fine powder, water transfer device, granulation, cooling, screening, packaging, dust removal, electronic control part. According to the different straw raw ingredients, specifically for your tailor-made production process, we customize your production process.